Viewed products

ONKYO Integrated Stereo Amplifier

A9110B

New product

Onkyo

Free delivery !

$ 449.65 GST incl.

Description

ONKYO Integrated Stereo Amplifier 50W + 50W High current amplification. Four ohm speaker driving capability. 4 x RCA, 1 x Phono, 1 line level out, 1 x Subwoofer out. Colour - Silver

ONKYO Integrated Stereo Amplifier. 50W + 50W High current amplification. Four ohm speaker driving capability. 4 x RCA, 1 x Phono, 1 line level out, 1 x Subwoofer out. Colour - Black

Integrated Stereo Amplifier
Versatile pre-main amp refreshes your music life

Onkyo builds on the success of its A-9010 pre-main amp with the new A-9110 Integrated Stereo Amplifier, a component that refines an original amp design that’s won an excellent critical and commercial reputation for dynamic, musical sound. Lively dynamics, deep bass, and layered detail emerge from warm and expressive tuning sure to please European ears. WRAT delivers high-current power stability via large custom capacitors, while low-NFB amps capture the depth and spatiality of analog and hi-res recordings. Five RCA inputs including MM phono stage connect your sources while high-quality speaker-posts reveal Onkyo’s hi-fi heritage and careful attention to detail. The A-9110 invites you into each album, the hours passing comfortably in pure analog sound.

 

 

Features:

  • HIGHLIGHTS

  • 50 W + 50 W high-current amplification

  • WRAT (Wide Range Amplification Technology)

  • Direct Mode for source-authentic audio reproduction

  • Phase Matching Bass Boost

  • High-current EI transformer, large custom audio capacitors, and discrete output stage
    MM phono input, 4 x RCA

  • New fine display for easy source selection

 

  • AMPLIFICATION FEATURES

  • 50 W + 50 W (4 Ω, 20 Hz–20 kHz, 0.9% THD, 2-ch driven, IEC)
  • WRAT (Wide Range Amplifier Technology)
  • Customized high-current EI transformer
  • Two large custom-fabricated audio-grade main capacitors
  • Optimum Gain Volume Circuitry for clear low-volume playback
  • 4 Ω speaker-driving capability
  • Phase Matching Bass Boost
  • Rigid anti-resonant 1.6 mm metal chassis
  • Direct Mode for source-authentic audio reproduction

 

  • CONNECTION FEATURES

  • 4 analog RCA inputs
  • 1 phono input with discrete MM phono equalizer
  • 1 analog RCA line-level output
  • Subwoofer pre-out
  • Non-magnetic speaker posts with clear knobs
  • 6.35 mm headphone jack
  • RI (Remote Interactive) input
  • ADDITIONAL FEATURES

  • Fine display shows active input
  • Independent tone controls for bass and treble with balance control
  • Easy-to-use controls for smooth operation without a remote
  • RI (Remote Interactive) input enables connection of a supported component for integrated control with one remote controller
  • Auto Power Standby
  • Available in silver or black

 

Power output 50 W + 50 W (4 Ω, 20 Hz–20 kHz, 0.9%, 2 channels driven, IEC)
Dynamic power 220 W (3 Ω, Front) 
190 W (4 Ω, Front) 
110 W (8 Ω, Front)
THD+N (Total Harmonic Distortion + Noise) 0.05% (8 Ω, 1 kHz, half power)
Input sensitivity and impedance

Line 200 mV/47 kΩ
Phono MM 4 mV/47 kΩ (IHF-A)

Rated RCA output level and impedance 0.2 V/2.3 kΩ (Line Out) 
1 V/ 500 Ω (Subwoofer Pre-Out)
Phono overload 70 mV (MM, 1 kHz, 0.5%)
Frequency response 10 Hz–100 kHz/+1 dB, -3 dB (Direct Mode)
Tone control ±10 dB, 100 Hz (Bass) 
±10 dB, 10 kHz (Treble)
Signal-to-noise ratio 103 dB (IHF-A, Line In, Speaker Out)
78 dB (IHF-A, Phono In, Speaker Out)
Speaker impedance 4–16 Ω
Power supply AC 220–230 V, 50/60 Hz
Power consumption 130 W
Standby power consumption 0.2 W
No-sound power consumption 14.3 W
Dimensions (W x H x D) 435 x 129 x 330 mm
Weight 7.0 kg

4 other products in the same category:

Reviews (0)

Follow us on Facebook